29th April 2025 - Cleaning the deck
 |
This time I thought I'll clean the deck early so I can enjoy the season without the job always been on my mind.
|
30th April 2025 - Grey water tank pump will not turn off after it has emptied the tank
 |
| Making a flyscreen for the forward hatch, plenty left over to make a small one for the bathroom and for the kitchen area. |
12th May 2025 - Oil Change
9th June 2025 - Darken the bedroom and insulate at the same time.
 |
| Had this great idea, put insulation on the cabin's windows. This will help keep in warm in winter and cool in summer and make the room dark to be able to sleep passed sunrise. |
 |
| Panels cut to size and painting black on one side, this will face out, so it blends in better. |
 |
| Before |
 |
| After, I had to have the bathroom door open, or the photo would have been black. |
21st June 2025 - Grey Water Tank still playing up. Now to try the pump.
This is called a joker valve. It's a one-way valve that with this tear is no longer working correctly.
And it should look like this.
 |
| I can confirm our grey water tank is now in good working order |
30th June 2025 - Kitchen Chairs
 |
| Another dinner chair broke, lucky we were in a port with an IKEA a bike ride away |
 |
| Looks good, we didn't get the black chairs, the white chairs are new to IKEA and they have a thicker plastic. |
28th July 2025 - Toilet
 |
| Fixing the Toilet, not flushing property. |
1st August 2025 - AIS Transponder
 |
| AIS Transponder bits |
 |
| Installing AIS Transponder |
29th August 2025 - Galley window gas spring
Galley window weighs 11 kilos so when the gas spring goes we get a workout to lift it up and when we close holding the hatch so it doesn't fall.
 |
| Preparing for the lift |
 |
| Holding it up and securing the left corner in the latch |
 |
| Because the gas spring wasn't doing its job, we used the boat hook to stop the hatch bending out of shape. |
 |
| Yes it's upside down, it has been this way since we have had Sun Chi |
 |
| Found out why, the screws have not been counter sunk so they stick out the smallest amount, which causes the gas spring not to laydown flat. For the new gas spring we are going to get a longer fitting at the end. |
 |
| you can see the gas spring doesn't sit flush and it will not close. |
 |
| New one in and this time the right way up. |
31st August 2025 - Benchtop
 |
| Replace the hinges on the benchtop, only 1 spare one left. |
 |
While the bench top is off, we are going to try to clean behind the bench. Photo above is before cleaning and below is after cleaning. |
Taking back to Australia to make new ones.
 |
| Canvas cover |
 |
| Helm cover |
No comments:
Post a Comment